Novel approaches to the synthesis and treatment of cathode materials for lithium-ion batteries
Thèse ou mémoire / Thesis or Dissertation
Date de publication
Autrices et auteurs
Identifiant ORCID de l’auteur
Contributrices et contributeurs
Direction de recherche
Publié dans
Date de la Conférence
Lieu de la Conférence
Éditeur
Cycle d'études
Maîtrise / Master's
Programme
Affiliation
Mots-clés
- Lithium-ion battery
- cathode material
- Pile lithium-ion
- matériau de cathode
- novel synthetic approaches
- nouveaux approches de synthèses
- treatments for mixed metal hydroxides and lithium iron phosphate
- traitements des hydroxydes de métaux mixte et phosphate de fer lithié
Organisme subventionnaire
Résumé
Résumé
Nous avons mis au point une approche novatrice pour la synthèse d’un
matériau de cathode pour les piles lithium-ion basée sur la décomposition
thermique de l’urée. Les hydroxydes de métal mixte (NixMnxCo(1-2x)(OH)2) ont
été préparés (x = 0.00 à 0.50) et subséquemment utilisés comme précurseurs à la
préparation de l’oxyde de métal mixte (LiNixMnxCo(1-2x)O2). Ces matériaux,
ainsi que le phosphate de fer lithié (LiFePO4), sont pressentis comme matériaux
de cathode commerciaux pour la prochaine génération de piles lithium-ion. Nous
avons également développé un nouveau traitement post-synthèse afin
d’améliorer la morphologie des hydroxydes.
L’originalité de l’approche basée sur la décomposition thermique de
l’urée réside dans l’utilisation inédite des hydroxydes comme précurseurs à la
préparation d’oxydes de lithium mixtes par l’intermédiaire d’une technique de
précipitation uniforme. De plus, nous proposons de nouvelles techniques de
traitement s’adressant aux méthodes de synthèses traditionnelles. Les résultats
obtenus par ces deux méthodes sont résumés dans deux articles soumis à des
revues scientifiques.
Tous les matériaux produits lors de cette recherche ont été analysés par
diffraction des rayons X (DRX), microscope électronique à balayage (MEB),
analyse thermique gravimétrique (ATG) et ont été caractérisés
électrochimiquement. La performance électrochimique (nombre de cycles vs
capacité) des matériaux de cathode a été conduite en mode galvanostatique.
We have developed a novel approach to the synthesis of cathode materials for lithium-ion batteries, based on the thermal decomposition of urea. Mixed metal hydroxides (NixMnxCo(1-2x)(OH)2), x = 0.00 to 0.50, were prepared and subsequently used as precursor for lithiated mixed metal oxide (LiNixMnxCo(1-2x)O2). These materials along with lithium iron phosphate (LiFePO4) are being considered as cathode materials for the next generation of lithium-ion batteries. We have also developed new post-synthetic treatments on the hydroxides in order to enhance the morphology, which would result in improved electrode properties. The novelty of this thesis is that for the first time mixed metal hydroxides for use as precursors for lithium mixed oxides have been prepared via a uniform precipitation technique from solution. In addition, we have proposed new treatments techniques towards the more traditional synthesis method for mixed metal hydroxides. The results obtained from these two methods are summarized within two articles that were recently submitted to peer-reviewed journals. Within this thesis, all materials were analyzed with X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA) and electrochemical measurements. The electrochemical performance (capacity vs cycle number) of the cathode materials were tested galvanostatically.
We have developed a novel approach to the synthesis of cathode materials for lithium-ion batteries, based on the thermal decomposition of urea. Mixed metal hydroxides (NixMnxCo(1-2x)(OH)2), x = 0.00 to 0.50, were prepared and subsequently used as precursor for lithiated mixed metal oxide (LiNixMnxCo(1-2x)O2). These materials along with lithium iron phosphate (LiFePO4) are being considered as cathode materials for the next generation of lithium-ion batteries. We have also developed new post-synthetic treatments on the hydroxides in order to enhance the morphology, which would result in improved electrode properties. The novelty of this thesis is that for the first time mixed metal hydroxides for use as precursors for lithium mixed oxides have been prepared via a uniform precipitation technique from solution. In addition, we have proposed new treatments techniques towards the more traditional synthesis method for mixed metal hydroxides. The results obtained from these two methods are summarized within two articles that were recently submitted to peer-reviewed journals. Within this thesis, all materials were analyzed with X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA) and electrochemical measurements. The electrochemical performance (capacity vs cycle number) of the cathode materials were tested galvanostatically.
Table des matières
Notes
Notes
Autre version linguistique
Ensemble de données lié
Licence
Approbation
Évaluation
Complété par
Référencé par
Ce document diffusé sur Papyrus est la propriété exclusive des titulaires des droits d'auteur et est protégé par la Loi sur le droit d'auteur (L.R.C. (1985), ch. C-42). Sauf si le document est diffusé sous une licence Creative Commons, il ne peut être utilisé que dans le cadre d'une utilisation équitable et non commerciale comme le prévoit la Loi (i.e. à des fins d'étude privée ou de recherche, de critique ou de compte-rendu). Pour toute autre utilisation, une autorisation écrite des titulaires des droits d'auteur sera nécessaire.