Calibration of the sensitivity of perfluorocarbon mixtures to nuclear recoil
Thèse ou mémoire / Thesis or Dissertation
Date de publication
Autrices et auteurs
Identifiant ORCID de l’auteur
Contributrices et contributeurs
Direction de recherche
Publié dans
Date de la Conférence
Lieu de la Conférence
Éditeur
Cycle d'études
Maîtrise / Master's
Programme
Affiliation
Mots-clés
- Matière sombre
- WIMP
- perfluorocarbon mixture
- nuclear recoil
- Chambre à bulles
- Modèle de Seitz
- Mélange de perfluorocarbone
- Recul nucléaire
- Dark matter
- PICO
- Bubble chamber
- Seitz model
Organisme subventionnaire
Résumé
Résumé
L’expérience PICO fait partie des chefs de file mondiaux dans la tentative de détection
directe de la matière sombre. Cette expérience se spécialise dans l’utilisation des détecteurs à
liquide surchauffé pour y parvenir. Le futur détecteur de la collaboration, PICO-500, tentera
de détecter les WIMPs (Weakly Interacting Massive Particle) une fois construit dans le
laboratoire sous-terrain SNOLAB. Ce détecteur utilisera un mélange de perfluorocarbone
comme fluide actif, une nouveauté pour les chambres à bulles. L’utilisation d’un mélange
présente des avantages importants dans la conception du détecteur. Celle-ci permettra de
diminuer les contraintes d’ingénierie tout en offrant une sensibilité de détection importante.
La chambre à bulles PICO-0.1 est utilisée principalement pour la calibration de perfluorocarbone.
À l’aide du tandem situé à l’Université de Montréal et d’une cible de vanadium-51,
j’ai pu envoyer des neutrons monoénergétiques afin d’évaluer l’énergie de seuil de la formation
de bulles dans ce mélange. Le modèle de Seitz décrivant la formation des bulles a été
bien étudié dans le cadre de fluide pur, mais pas dans le cas de mélange de perfluorocarbone.
Ce type de calibration effectuée avec le détecteur PICO-0.1 nous a permis de confirmer
la validité du modèle de Seitz et que les effets du transport de masse peut être négligés
pour ce mélange. La vérification de cette hypothèse était cruciale à la compréhension de la
dynamique impliquée dans la formation des bulles et nécessaire pour l’utilisation du futur
détecteur PICO-500.
The PICO experiment is one of the world’s leading experiments in the effort to directly detect dark matter. This experiment specializes in the use of superheated liquid detectors for that end. The future PICO detector, PICO-500, will attempt to detect WIMPs (Weakly Interacting Massive Particle) once it will be built at the underground laboratory SNOLAB. This detector will use a mixture of perfluorocarbon as an active fluid, a novelty for bubble chambers in dark matter searches. The use of mixture presents important advantages in the design of this detector. This will allow to lessen some of the engineering constraints while still offering a high sensitivity. The PICO-0.1 bubble chamber is mainly used for the calibration of perfluorocarbon. With the help of the Université de Montréal’s tandem and a target of vanadium-51, I was able to send monoenergetic neutrons to evaluate the threshold energy of bubble nucleation of this mixture. The Seitz model describing bubble formation has been widely studied in the context of pure fluid, but not in the case of perfluorocarbon mixture. This type of calibration with PICO-0.1 has allowed us to confirm that the Seitz model still apply and that the effects of mass transport can be neglected for this mixture. The verification of this hypothesis was crucial to the understanding of the dynamics implicated in bubble formation and was necessary for the future use of PICO-500.
The PICO experiment is one of the world’s leading experiments in the effort to directly detect dark matter. This experiment specializes in the use of superheated liquid detectors for that end. The future PICO detector, PICO-500, will attempt to detect WIMPs (Weakly Interacting Massive Particle) once it will be built at the underground laboratory SNOLAB. This detector will use a mixture of perfluorocarbon as an active fluid, a novelty for bubble chambers in dark matter searches. The use of mixture presents important advantages in the design of this detector. This will allow to lessen some of the engineering constraints while still offering a high sensitivity. The PICO-0.1 bubble chamber is mainly used for the calibration of perfluorocarbon. With the help of the Université de Montréal’s tandem and a target of vanadium-51, I was able to send monoenergetic neutrons to evaluate the threshold energy of bubble nucleation of this mixture. The Seitz model describing bubble formation has been widely studied in the context of pure fluid, but not in the case of perfluorocarbon mixture. This type of calibration with PICO-0.1 has allowed us to confirm that the Seitz model still apply and that the effects of mass transport can be neglected for this mixture. The verification of this hypothesis was crucial to the understanding of the dynamics implicated in bubble formation and was necessary for the future use of PICO-500.
Table des matières
Notes
Notes
Autre version linguistique
Ensemble de données lié
Licence
Approbation
Évaluation
Complété par
Référencé par
Ce document diffusé sur Papyrus est la propriété exclusive des titulaires des droits d'auteur et est protégé par la Loi sur le droit d'auteur (L.R.C. (1985), ch. C-42). Sauf si le document est diffusé sous une licence Creative Commons, il ne peut être utilisé que dans le cadre d'une utilisation équitable et non commerciale comme le prévoit la Loi (i.e. à des fins d'étude privée ou de recherche, de critique ou de compte-rendu). Pour toute autre utilisation, une autorisation écrite des titulaires des droits d'auteur sera nécessaire.